Publikasi Ilmiah - Departemen Teknik Material

Butuh Bantuan?

Silakan hubungi kami di sini:

Publikasi Internasional

2020

Judul Publikasi Jurnal Internasional dan Nasional

No	Judul Artikel	Nama Penulis	Nama Jurnal
1	Failure Investigation of a High-Temperature Cast Soot Blower Lance Tube Nozzle	Budi Agung Kurniawan	Journal of Failure Analysis and Prevention
2	Manipulation of Nitrogen-Heteroatom Configuration for Enhanced Charge-Storage Performance and Reliab	Sutarsis	ACS Applied Materials and Interfaces
3	The strength of polylactic acid composites reinforced with sugarcane bagasse and rice husk	Hariyati Purwaningsih	Materials Science Forum
4	Effect of sintering temperature on morphology, mechanicai properties and degradation rate of magnesi	Agung Purniawan Amaliya Rasyida Sigit Tri Wicaksono Hariyati Purwaningsih	Journal of Computational and Theoretical Nanoscience
5	Synthesis of ZnO/rGO/TiO2 Composite and Its Photocatalytic Activity for Rhodamine B Degra	Hariyati Purwaningsih Diah Susanti	IOP Conference Series: Materials Science and Engineering
6	Effective beneficiation of low content nickel ferrous laterite using fluxing agent through Na2<	Yuli Setiyorini Sungging Pintowantoro Fakhreza Abdul	Materialwissenschaft und Werkstofftechnik
7	Tangential X-Ray Radiography for Pitting Geometry Analysis of Outside Wall of Insulated Steel Pipes	Sulistijono	Russian Journal of Nondestructive Testing
8	A meshless generalized finite difference method for 2D elasticity problems	Widyastuti Mas Irfan Purbawanto Hidayat Rindang Fajarin	Engineering Analysis with Boundary Elements
9	MnO2 Nanoparticles Prepared by Alternating Monopolar Arrangement Electrolysis and Their E	Hariyati Purwaningsih	IOP Conference Series: Materials Science and Engineering
10	Alkali treatment of lignocellulosic fibers extracted from sugarcane bagasse: Composition, structure,	Hariyati Purwaningsih	Polymer Testing
11	Effects of sample shapes and thickness on distribution of temperature inside the mineral ilmenite du	Mas Irfan Purbawanto Hidayat	Minerals
12	Design for temperature distribution of continuous furnace system for sintering application	Wikan Jatimurti Vania Mitha Pratiwi Widyastuti	IOP Conference Series: Earth and Environmental Science
13	Direct reduction of nickel laterite limonitic ore using a coal-dolomite mixture bed and Na2</in	Fakhreza Abdul Sungging Pintowantoro	Journal of Chemical Technology and Metallurgy
14	The Rate of HF Formation During Addition of Alumina to NaF-AlF3 Melts	Dian Mughni Fellicia	Minerals, Metals and Materials Series
15	High oxygen reduction reaction activity on various iron loading of Fe-PANI/C catalyst for PEM fuel c	Diah Susanti Lukman Noerochim	Ionics

2019

Judul Publikasi Jurnal Internasional dan Nasional

No	Judul Artikel	Nama Penulis	Nama Jurnal
1	The Effect of Aging on Microstructure, Mechanical Properties, and Electrical Conductivity of 6061 Al	Dian Mughni Fellicia, Rochman Rochiem	2019 International Conference on Technologies and Policies in Electric Power and Energy, TPEPE 2019
2	High stability on N-doped LiFePO4/C as cathode of lithium-ion battery	Lukman Noerochim. Diah Susanti	AIP Conference Proceedings
3	Characterization of vinyl ester bio-resin for core material sandwich panel construction of ship structur	Sigit Tri Wicaksono, Hosta Ardhyananta	AIP Conference Proceedings
4	High electrochemical performance of F-doped LiFePO4 as cathode for lithium-ion battery	Diah Susanti, Lukman Noerochim	AIP Conference Proceedings
5	Improvement of compressive strength of Mg-Fe-Ca alloy by heat treatment as biodegradable implant	Sigit Tri Wicaksono, Amaliya Rasyida, Agung Purniawan	AIP Conference Proceedings
6	The study of the distribution and deformation of burden layer in 250 ton/day mini blast furnace using	Fakhreza Abdul, Mas Irfan Purbawanto Hidayat, Sungging Pintowantoro	International Journal on Advanced Science, Engineering and Information Technology
7	Structural evaluation on sugarcane bagasse treated using sodium and calcium hydroxide	Hariyati Purwaningsih	E3S Web of Conferences
8	Physical, tensile, and biodegradability properties of cross-linked polyvinyl alcohol/palm kernel she	Hosta Ardhyananta	BioResources
9	Selective reduction of laterite nickel ore	Fakhreza Abdul, Sungging Pintowantoro	Materials Transactions
10	On Impact Problems of Projectile Using Meshless Peridynamics Analysis	Mas Irfan Purbawanto Hidayat	IOP Conference Series: Materials Science and Engineering
11	The Preparation of Electrical Double Layer Capacitor (EDLC) from Boron-doped Reduced-Graphene Oxide	Hosta Ardhyananta, Hariyati Purwaningsih, Diah Susanti	IOP Conference Series: Materials Science and Engineering
12	Effect of Addition Tahongai Leaf Extract (Kleinhovia hospita Linn.) As Organic Inhibitor on 1040 AIS	Sulistijono	IOP Conference Series: Materials Science and Engineering
13	The effect of deposition time on ag-zn thin film forming using rf sputtering for antimicrobial coating	Rindang Fajarin, Sigit Tri Wicaksono, Agung Purniawan	Materials Science Forum
14	Analysis of cylindrical briquette dimension on total iron content and the degree of metallization in	Sungging Pintowantoro, Fakhreza Abdul	Materials Science Forum
15	Study of the effect of pp and ldpe thermoplastic binder addition on the mechanical properties and ph	Sigit Tri Wicaksono, Amaliya Rasyida, Hosta Ardhyananta	Materials Science Forum
16	Effect of rgo addition toward photocatalyst properties of zno/rgo/tio2 for rhodamine b degradation	Hariyati Purwaningsih, Diah Susanti	Materials Science Forum
17	Effect of nanocellulose on acoustical and thermal insulation properties of silicone rubber composite	Amaliya Rasyida, Agung Purniawan, Moh. Farid, Diah Susanti	Materials Science Forum
18	Analysis of large bell angle in double bell system on burden material distribution and layer deforma	Fakhreza Abdul, Mas Irfan Purbawanto Hidayat, Sungging Pintowantoro	Materials Science Forum
19	Nanocarbon from rice straw as supercapacitor electrode	Vania Mitha Pratiwi	Materials Science Forum
20	The study of additive variation in smelting process of sponge iron into pig iron on the fe content a	Fakhreza Abdul, Sungging Pintowantoro	Materials Science Forum
21	Preparation and characterization of carbon from petung bamboo (Dendrocalamus asper) and ori bamboo	Hosta Ardhyananta Alvian Toto Wibisono Sigit Tri Wicaksono	Materials Science Forum
22	Investigation of carbon composition for electrochemical properties as pemfc cathode catalyst	Lukman Noerochim Diah Susanti	Materials Science Forum
23	Preliminary characterization of hydrogel composite alginate/pva/r-go as an injectable materials for	Sigit Tri Wicaksono Amaliya Rasyida	Materials Science Forum
24	Effect of high loading glycine on fe2o3 nano oval as anode for lithium-ion battery	Lukman Noerochim Budi Agung Kurniawan	Materials Science Forum
25	Finite element simulation of delamination in carbon fiber/epoxy laminate using cohesive zone model	Mas Irfan Purbawanto Hidayat Lukman Noerochim	Materials Science Forum
26	Characterization of nasicon structure prepared with titanium dioxide doping for nox gas sensor applied	Widyastuti Hariyati Purwaningsih Vania Mitha Pratiwi	Materials Science Forum
27	Preliminary study of alginates extracted from brown algae (Sargassum sp.) available in madura island	Vania Mitha Pratiwi Sigit Tri Wicaksono Amaliya Rasyida	Materials Science Forum
28	Analysis the effect of temperature and holding time of full-annealing heat treatment to micro struct	Rochman Rochiem Dian Mughni Fellicia	Materials Science Forum
29	Adsorption performance of li1.6mn1.67o4 for lithium extraction from geothermal fluid of lumpur sidoarjo	Rindang Fajarin Lukman Noerochim	Materials Science Forum
30	Effect of ph, rotation speed and imidazoline-paracetamol based inhibitor volume ratio on corrosion	Budi Agung Kurniawan Vania Mitha Pratiwi	Materials Science Forum
31	Porous silica nanomaterial derived from organic waste rice husk as highly potential drug delivery	Vania Mitha Pratiwi Hariyati Purwaningsih Agung Purniawan, Diah Susanti	Materials Science Forum
32	Experimental Analysis on the Tensile Strength of Polyester Resin based Calcium Carbonate Powder and	Sigit Tri Wicaksono Hosta Ardhyananta	IOP Conference Series: Materials Science and Engineering
33	Effect of Acetone/Isopropanol as Solvent TiO2 Active Flux on Penetration Characteristics	Agung Purniawan Hosta Ardhyananta	IOP Conference Series: Materials Science and Engineering
34	Effect of Calcium Carbonate on the Tensile and Density Properties of Kenaf/Polyester Hybrid Composit	Hosta Ardhyananta Sigit Tri Wicaksono	IOP Conference Series: Materials Science and Engineering
35	Synthesis and characterization of mesoporous silica nanoparticles (MSNp) MCM 41 from natural waste	Vania Mitha Pratiwi Diah Susanti Rochman Rochiem	IOP Conference Series: Materials Science and Engineering
36	Efficiency and characterization study of low voltage current sacrificial anode on Al-Zn-Cu and Al-Zn	Sulistijono	IOP Conference Series: Materials Science and Engineering
37	Reversible ON/OFF switching of photoluminescence from CsPbX3 quantum dots coated with sil	Azzah Dyah Pramata	Chemical Communications
38	Modeling and experimental study of Al-Cu alloy sand casting for circuit breaker	Mas Irfan Purbawanto Hidayat Alvian Toto Wibisono Rochman Rochiem Dian Mughni Fellicia	International Journal on Advanced Science, Engineering and Information Technology
39	Study of lateral vibration of drilling string with mass imbalance using finite element	Mas Irfan Purbawanto Hidayat	International Journal on Advanced Science, Engineering and Information Technology
40	Formation of Carbon Fibres from Polymer Poly(vinyl alcohol)/Acetylene Black using Electrospinning Me	Hariyati Purwaningsih	IOP Conference Series: Materials Science and Engineering
41	High electrochemical performance of Li4Ti5O12/C synthesized by ball	Widyastuti Diah Susanti, Lukman Noerochim	Ionics
42	Analysis on the effect of pressure and mass fraction of chromium to mechanical properties and electro	Lukman Noerochim	International Journal of Microstructure and Materials Properties
43	A Preliminary Study on the Thermo-optics Characteristics of Chromium Ferrite Ferrofluids	Sigit Tri Wicaksono	IOP Conference Series: Materials Science and Engineering
44	The Enhancement of Compressive Strength of Cement-Based Composite Filled with LDPE/PET/Styrofoam Agg	Sigit Tri Wicaksono, Mas Irfan Purbawanto Hidayat	IOP Conference Series: Materials Science and Engineering
45	Effect of Cetyl Trimethyl Ammonium Bromide as Template of Mesoporous Silica MCM-41 from Rice Husk by	Vania Mitha Pratiwi, Hariyati Purwaningsih, Agung Purniawan, Diah Susanti	IOP Conference Series: Materials Science and Engineering
46	Synthesis and electrochemical performance of Ã?Â±-Fe2O3 nano ellipse as anode fo	Diah Susanti, Lukman Noerochim, Tubagus Noor Rohmannudin	Asian Journal of Chemistry
47	Meshless local B-spline collocation method for heterogeneous heat conduction problems	Mas Irfan Purbawanto Hidayat	Engineering Analysis with Boundary Elements
48	Deformation and failure of sugarcane bagasse reinforced PP	Hariyati Purwaningsih	European Polymer Journal
49	Synthesis of dual-phase Li4Ti5O12-TiO2nanowires as anode	Lukman Noerochim, Hariyati Purwaningsih	Ionics
50	Effect of degassing time and cooling rate on microstructure and porosity of aluminum 6061 alloy usin	Alvian Toto Wibisono, Wikan Jatimurti	Materials Science Forum

2018

Judul Publikasi Jurnal Internasional dan Nasional

No	Judul Artikel	Nama Penulis	Nama Jurnal
1	A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials	Mas Irfan P. Hidayat, Bambang Ariwahjoedi, Setyamartana Parman, Sonny Irawan	International Journal of Computational Methods: 15(2) pp 18500071-34 2018
2	Ni and Zn Substituted M-type Barium Hexaferrite Processed by Sol–Gel Auto Combustion Method	Widyastuti, Vania Mitha Pratiwi, M. Febri Dwi	Journal of Physics, 877 (12015), 2018, terindex Scopus
3	Comparison of corrosion inhibitor performance based on green corrosion inhibitor of extract leaf tobacco and commercial imidazoline inhibitor in a sweet environment at carbon steel AISI 1045 in NaCl 3.5% solution	Mochamad Alvan Mifta Chusururi, Budi Agung Kurniawan, Lukman Noerochim	Journal of Applied and Physical Sciences 4(11) pp 14-24, 2018 (tidak terindex scopus)
4	Pelapisan FeCrMnNiSi pada Grey Cast Iron FC 25 Variabel Tekanan Gas pada Metode Thermal Arc Spray	Hariyati Purwaningsih, Agung Purniawan, Rifqi Tantyo Putra	Jurnal Ilmu Dasar Vol 19(1) pp 29-36, 2018 (NASIONAL)

Judul Publikasi di Seminar Internasional (terindex SCOPUS)

NO	JUDUL MAKALAH	SEMINAR	PENULIS
1	Study on Mechanical and Physical Properties of Composite Materials with Recycled PET as Fillers for Paving Block Application	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Sigit TW, Hosta A, Amaliya R
2	Characterization of PLA/Bovine Bone Composite as A Candidate Material For Artificial Bone	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Sigit TW, Adven FN Hutajulu, Hosta A, Amaliya R
3	INTERNAL GEOMETRY EFFECT OF STRUCTURED PLA MATERIALS MANUFACTURED BY DROPLET-BASED 3D PRINTER ON ITS MECHANICAL PROPERTIES	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Sigit TW, Hosta A, Amaliya R, Mas Irfan PH
4	The Effect of Extraction Methods on Final Properties of Alginates obtained from Brown Algae (Sargassum Sp.) Available in Madura Island as Hydrogel Materials	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Amaliya R, Thalyta R Pradipta, Sigit TW, Vania Mitha P, Yeny Widya R
5	Numerical Simulation of Temperature Distribution in Cylindrical Ilmenite (FeTiO3) due to Microwave Heating	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Mas Irfan PH, Dian Mughni, Ferdiansyah Iqbal
6	Prediction of Composite Fatigue Life under Variable Amplitude Loading Using Artificial Neural Network Trained By Genetic Algorithm	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	M. Nur Rohman, Mas Irfan PH, Agung Purniawan
7	Analysis of Two Dimensional Heat Conduction in Functionally Graded Materials (FGMs) Using Finite Element Method	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Rezza Ruzzuqi, Mas Irfan PH, Widyastuti
8	Simulation of Impact Ballistic of Cu-10wt%Sn Frangible Bullet using Smoothed Particle Hydrodynamics	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Mas Irfan PH, Widyastuti, Peniel Simaremare
9	Effect of casing imperfection on the casing strength in steam injection wells	1st International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017	Mas Irfan PH, Sonny Irawan, Muhamad Zaki A
10	Analyzing the Effect of Large Bell Diameter Size to The Layer Deformation and Burden Materials Distribution in 250 Ton/Day Mini Blast Furnace Capacity using Discrete Element Method	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Sungging Pintowantoro, Mas Irfan PH, Fakhreza Abdul
11	Study of Variation Grain Size in Desulphurization Process of Calcined Petroleum Coke	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Yuli Setiyorini, Fanny Leestiana, Agung Purniawan
12	New Alternative to the development of dental Filling Material Made from (CH-CaCO3-(C-HA)-MMA) Resulted from The Recycling of Organic Material	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	M. Arief Setyawan Sungging Pintowantoro, Fakhreza Abdul
13	Effects of Reduction Temperature to Ni and Fe Content and The Morphology of Agglomerate of Reduced Laterite Limonitic Nickel Ore by Coal-bed Method	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Fakhreza Abdul, Sungging Pintowantoro, Adji Kawigraha
14	Analysis of Holding Time Variations to Ni and Fe Content and Morphology in Nickel Laterite Limonitic Reduction Process by using Coal-Dolomite Bed	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Fakhreza Abdul, Sungging Pintowantoro, Ridwan Bagus
15	Nanocellulose Based Polymer Composite for Acoustical Materials	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Moh. Farid, Agung Purniawan, Diah Susanti
16	Morphology and Inhibition Performance of Ag Thin Film as Antimicrobial Coating Deposited by RF-PVD on 316 L Stainless Steel	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Agung Purniawan, Yudhistira S.A.K, Amaliya Rasyida, Tri Mardji Atmono
17	Influence of Copper Composition on Mechanical Properties of Biodegradable Material Mg-Zn-Cu for Orthopedic Application	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Agung Purniawan, Hana Maulidiah, Hariyati Purwaningsih
18	Effect of Deposition Time of Sputtering Ag-Cu Thin Film on Mechanical and Antimicrobial Properties	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Agung Purniawan, Ratna Hermastuti, Hariyati Purwaningsih, Tri Mardji Atmono
19	Effect of Fluid Flow, pH and Tobacco Leaf Extracts Concentration as Organic Inhibitors to CO2 Corrosion Characteristics of AISI 1045 Steel in 3.5% NaCl Environment	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Budi Agung Kurniawan , Vania Mitra Pratiwi , Nafi’ul Fikri Ahmadi
20	A Review of Various Gas Pressure of Wire Arc Spray On FeCrBMnSi Metal Coating	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Rochman Rochiem, Budi Agung Kurniawan, Wikan Jatimurti
21	Effect Of Current And Travel Speed Variation Of TIG Welding On Microstructure And Hardness Of Stainless Steel SS 316L	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Wikan Jatimurti, Budi Agung Kurniawan, Vania Mitra Pratiwi
22	Electrochemical Performance of Fe3O4 Micro Flower as Anode for Lithium Ion Batteries	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Lukman Noerochim, Dika Anggara, Diah Susanti
23	Porous Micro Sphere Fe₂O₃ as Anode for Lithium Ion Batteries	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Lukman Noerochim, Diah Susanti, Achmad Subhan
24	Effect of Temperature on Adsorption Performance of Lithium Manganese Oxide for Lithium Extraction of Lumpur Sidoarjo	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Lukman Noerochim, Diah Susanti, Amien Widodo
25	Study of Extraction with Soxhletation Method on Organic Material as Green Corrosion Inhibitor	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Tubagus Noor Rohmannudin, Lukman Noerochim, Sulistijono
26	Utilization of Tahongai Stem Bark (Kleinhovia hospita Linn.) Extract as Corrosion Inhibitor on API 5L Steel	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Yoel Rizky, Sulistijono, Eli Novita
27	Study of Using Mixture of Bintaro and Coconut Shell Charcoal Powder as Pack Carburizing Media on ST 41 Steel	1st International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017	Aji Ridhotullah, Sulistijono, Rahmat Ashari
28	Effect a Chemical Treatment of Pineapple Leaf Fiber (PALF) for Mechanical Properties as a Reinforced Composite Matrix Polyesters	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Fadil Azhar Ekoputra, Sulistijono, Ika Ismail
29	Analysis of Sound Insulation Capability and Modulus Elasticity according to Shape and Composition of Natural Fiber Composite Kayu Galam (Melaleuca leucadendra) – Polyester	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Ammar Farhan Rayudi, Sulistijono, Firman Sidiq
30	Effect of Volume Fraction Filler on Sound Insulation in Oil Palm Fronds Fiber Composite Polyester Matrix	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Firman Sidiq, Sulistijono, Ika Ismail
31	The Effect of Zinc (Zn) Content to Cell Potential Value and Efficiency Aluminium Sacrificial Anode in 0.2 M Sulphuric Acid Environment	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Ahmad Ridho Akranata, Sulistijono, Jatmoko Awali
32	Effect of Heat Input with Current Variation on Weld Overlay GTAW Method wtih ERNi-CI and ERNiFe-CI Fillers on Mechanical Properties and Micro Structure of Main Cap Product	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Muhammad Ikbal Laisa, Sulistijono, Jatmoko Awali
33	Analysis of Efficiency and Corrosion Rate on 1040 AISI Steel with the Use of Organic Inhibitors from Tahongai (Kleinhovia hospita Linn.) Leaf Extract	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Eli Novita Sari, Sulistijono, Yoel Rizky
34	The Effect of Smelting Time and Composition of Palm Kernel Shell Charcoal Reductant toward Extractive Pomalaa Nickel Laterite Ore in Mini Electric Arc Furnace	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Iqbal Huda Sihotang, Sulistijono, Ika Ismail
35	Synthesis of Cashew Nut Shell Liquid (CNSL) by Hot Press Method and its Application as Anti Corrosion Coating	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Haniffudin Nurdiansyah
36	FABRICATION OF MESOPOROUS SILICA NANOPARTICLES BY SOL GEL METHOD FOLLOWED VARIOUS HYDROTHERMAL TEMPERATURE	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Hariyati Purwaningsih, Diah Susanti, Haniffudin Nurdiansah
37	The Effect of Weight Fraction Fe₂O₃:TiO₂ and Temperature Process of Pseudobrookite Synthesize (Fe₂TiO₅) on Optical and Electrical Properties	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Vania Mitha Pratiwi, Rindang Fajarin, Widyastuti
38	The Effect of BaM/PANI Composition with Epoxy Paint Matrix on Single Layer and Double Layer Coating with Spray Coating Method for Radar Absorbing Materials Applications	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Widyastuti, Rindang Fajarin, Vania Mitha Pratiwi
39	Sintering Temperature Effect on Electrical and Thermal Properties of Zn1-xAlxO as Thermoelectric Material Candidate	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Rindang Fajarin, Amelthya Rahel, Widyastuti
40	Study Design of Body And Temperature Zone Continuous Furnace Sintering Material Frangible Cu-5wt%Sn	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Widyastuti

Judul Publikasi di Seminar Nasional dan Internasional tidak terindex Scopus

NO	JUDUL MAKALAH	SEMINAR	PENULIS
1	Analisis Impak dan Ricochet Peluru Frangible Cu-10wt%Sn dengan Metode Meshless Smoothed Particle Hydrodynamics	Seminar Nasional Metalurgi dan Material (SENAMM) X 2017	Mas Irfan PH, Widyastuti, Peniel Simaremare
2	ANALISA EFEKTIFITAS POLYETHYLENE DAN POLYPROPYLENE SEBAGAI TOP COAT PADA METODE PELAPIS 3 LAYER COATING TERHADAP KETAHANAN KOROSI DARI BAJA API 5L GRADE B	Seminar Nasional Metalurgi dan Material (SENAMM) X 2017	Agung Purniawan, Yosaphat SM Siahaan, Budi Agung Kurniawan
3	The effect of nitrogen dopant on the capacitive properties of graphene based supercapacitor	TACT 2017 International Thin Films Conference, Hualien, Taiwan	Diah Susanti, Dyah Ayu Safitri, Haniffudin Nurdiansah, Hariyati Purwaningsih, Yeny Widya R
4	PELAPISAN FeCrMnNiCSi PADA GREY CAST IRON FC 25 VARIABEL TEKANAN GAS PADA METODE THERMAL ARC SPRAY	Seminar Nasional Fisika ke II	Hariyati Purwaningsih, Diah Susanti, Haniffudin Nurdiansah
5	Pengaruh Penambahan SiO2 Hasil Ekstraksi Sekam Padi Pada Sintesis Natrium Superionik Konduktor (NASICON) dan Sifat Konduktivitas Ionik Baterai Elektrolit Padat	Seminar Nasional Fisika ke II	Hariyati Purwaningsih, Agung Purniawan, Rochman Rochiem

2017

Judul Publikasi Jurnal Internasional

No	Judul Artikel	Nama Penulis	Nama Jurnal
1	Meshless Local B-Spline Collocation Method for Two-Dimensional Heat Conduction Problems With Nonhomogenous and Time-Dependent Heat Sources	Mas Irfan P. Hidayat, Bambang Ariwahjoedi, Setyamartana Parman, Tadimalla V L N Rao	ASME Journal of Heat Transfer
2	A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials	Mas Irfan P. Hidayat, Bambang Ariwahjoedi, Setyamartana Parman, Sonny Irawan	International Journal of Computational Methods
3	Mechanical Properties and Thermal Stability of Epoxy/RTV Silicone Rubber	Fahriadi Pakaya, Hosta Ardhyananta, Sigit Tri Wicaksono	IPTEK The Journal for Technology and Science
4	Effect of Screw Diameter in Femoral Fracture Fixation Modeled by Finite Element Method	Muhammad Nashrullah, Belladina Clara Shinta, Mas Irfan P. Hidayat, Agung Purniawan, Yuli Setiyorini	IPTEK The Journal for Technology and Science
5	Effect of nano-BaTiO3 on thermal, mechanical, and electrical properties of HDDA/TPA photopolymer prepared by a digital light processor RP machine	ST Wicaksono, SH Chiu, KT Chen	Science and Engineering of Composite Materials Vol 24 issue 6, 2017

Judul Publikasi di Seminar Internasional (terindex SCOPUS)

NO	JUDUL MAKALAH	SEMINAR	PENULIS
1	Study on Mechanical and Physical Properties of Composite Materials with Recycled PET as Fillers for Paving Block Application	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Sigit TW, Hosta A, Amaliya R
2	Characterization of PLA/Bovine Bone Composite as A Candidate Material For Artificial Bone	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Sigit TW, Adven FN Hutajulu, Hosta A, Amaliya R
3	INTERNAL GEOMETRY EFFECT OF STRUCTURED PLA MATERIALS MANUFACTURED BY DROPLET-BASED 3D PRINTER ON ITS MECHANICAL PROPERTIES	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Sigit TW, Hosta A, Amaliya R, Mas Irfan PH
4	The Effect of Extraction Methods on Final Properties of Alginates obtained from Brown Algae (Sargassum Sp.) Available in Madura Island as Hydrogel Materials	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Amaliya R, Thalyta R Pradipta, Sigit TW, Vania Mitha P, Yeny Widya R
5	Numerical Simulation of Temperature Distribution in Cylindrical Ilmenite (FeTiO3) due to Microwave Heating	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Mas Irfan PH, Dian Mughni, Ferdiansyah Iqbal
6	Prediction of Composite Fatigue Life under Variable Amplitude Loading Using Artificial Neural Network Trained By Genetic Algorithm	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	M. Nur Rohman, Mas Irfan PH, Agung Purniawan
7	Analysis of Two Dimensional Heat Conduction in Functionally Graded Materials (FGMs) Using Finite Element Method	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Rezza Ruzzuqi, Mas Irfan PH, Widyastuti
8	Simulation of Impact Ballistic of Cu-10wt%Sn Frangible Bullet using Smoothed Particle Hydrodynamics	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Mas Irfan PH, Widyastuti, Peniel Simaremare
9	Effect of casing imperfection on the casing strength in steam injection wells	1st International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017	Mas Irfan PH, Sonny Irawan, Muhamad Zaki A
10	Analyzing the Effect of Large Bell Diameter Size to The Layer Deformation and Burden Materials Distribution in 250 Ton/Day Mini Blast Furnace Capacity using Discrete Element Method	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Sungging Pintowantoro, Mas Irfan PH, Fakhreza Abdul
11	Study of Variation Grain Size in Desulphurization Process of Calcined Petroleum Coke	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Yuli Setiyorini, Fanny Leestiana, Agung Purniawan
12	New Alternative to the development of dental Filling Material Made from (CH-CaCO3-(C-HA)-MMA) Resulted from The Recycling of Organic Material	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	M. Arief Setyawan Sungging Pintowantoro, Fakhreza Abdul
13	Effects of Reduction Temperature to Ni and Fe Content and The Morphology of Agglomerate of Reduced Laterite Limonitic Nickel Ore by Coal-bed Method	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Fakhreza Abdul, Sungging Pintowantoro, Adji Kawigraha
14	Analysis of Holding Time Variations to Ni and Fe Content and Morphology in Nickel Laterite Limonitic Reduction Process by using Coal-Dolomite Bed	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Fakhreza Abdul, Sungging Pintowantoro, Ridwan Bagus
15	Nanocellulose Based Polymer Composite for Acoustical Materials	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Moh. Farid, Agung Purniawan, Diah Susanti
16	Morphology and Inhibition Performance of Ag Thin Film as Antimicrobial Coating Deposited by RF-PVD on 316 L Stainless Steel	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Agung Purniawan, Yudhistira S.A.K, Amaliya Rasyida, Tri Mardji Atmono
17	Influence of Copper Composition on Mechanical Properties of Biodegradable Material Mg-Zn-Cu for Orthopedic Application	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Agung Purniawan, Hana Maulidiah, Hariyati Purwaningsih
18	Effect of Deposition Time of Sputtering Ag-Cu Thin Film on Mechanical and Antimicrobial Properties	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Agung Purniawan, Ratna Hermastuti, Hariyati Purwaningsih, Tri Mardji Atmono
19	Effect of Fluid Flow, pH and Tobacco Leaf Extracts Concentration as Organic Inhibitors to CO2 Corrosion Characteristics of AISI 1045 Steel in 3.5% NaCl Environment	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Budi Agung Kurniawan , Vania Mitra Pratiwi , Nafi’ul Fikri Ahmadi
20	A Review of Various Gas Pressure of Wire Arc Spray On FeCrBMnSi Metal Coating	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Rochman Rochiem, Budi Agung Kurniawan, Wikan Jatimurti
21	Effect Of Current And Travel Speed Variation Of TIG Welding On Microstructure And Hardness Of Stainless Steel SS 316L	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Wikan Jatimurti, Budi Agung Kurniawan, Vania Mitra Pratiwi
22	Electrochemical Performance of Fe3O4 Micro Flower as Anode for Lithium Ion Batteries	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Lukman Noerochim, Dika Anggara, Diah Susanti
23	Porous Micro Sphere Fe₂O₃ as Anode for Lithium Ion Batteries	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Lukman Noerochim, Diah Susanti, Achmad Subhan
24	Effect of Temperature on Adsorption Performance of Lithium Manganese Oxide for Lithium Extraction of Lumpur Sidoarjo	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Lukman Noerochim, Diah Susanti, Amien Widodo
25	Study of Extraction with Soxhletation Method on Organic Material as Green Corrosion Inhibitor	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Tubagus Noor Rohmannudin, Lukman Noerochim, Sulistijono
26	Utilization of Tahongai Stem Bark (Kleinhovia hospita Linn.) Extract as Corrosion Inhibitor on API 5L Steel	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Yoel Rizky, Sulistijono, Eli Novita
27	Study of Using Mixture of Bintaro and Coconut Shell Charcoal Powder as Pack Carburizing Media on ST 41 Steel	1st International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017	Aji Ridhotullah, Sulistijono, Rahmat Ashari
28	Effect a Chemical Treatment of Pineapple Leaf Fiber (PALF) for Mechanical Properties as a Reinforced Composite Matrix Polyesters	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Fadil Azhar Ekoputra, Sulistijono, Ika Ismail
29	Analysis of Sound Insulation Capability and Modulus Elasticity according to Shape and Composition of Natural Fiber Composite Kayu Galam (Melaleuca leucadendra) – Polyester	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Ammar Farhan Rayudi, Sulistijono, Firman Sidiq
30	Effect of Volume Fraction Filler on Sound Insulation in Oil Palm Fronds Fiber Composite Polyester Matrix	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Firman Sidiq, Sulistijono, Ika Ismail
31	The Effect of Zinc (Zn) Content to Cell Potential Value and Efficiency Aluminium Sacrificial Anode in 0.2 M Sulphuric Acid Environment	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Ahmad Ridho Akranata, Sulistijono, Jatmoko Awali
32	Effect of Heat Input with Current Variation on Weld Overlay GTAW Method wtih ERNi-CI and ERNiFe-CI Fillers on Mechanical Properties and Micro Structure of Main Cap Product	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Muhammad Ikbal Laisa, Sulistijono, Jatmoko Awali
33	Analysis of Efficiency and Corrosion Rate on 1040 AISI Steel with the Use of Organic Inhibitors from Tahongai (Kleinhovia hospita Linn.) Leaf Extract	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Eli Novita Sari, Sulistijono, Yoel Rizky
34	The Effect of Smelting Time and Composition of Palm Kernel Shell Charcoal Reductant toward Extractive Pomalaa Nickel Laterite Ore in Mini Electric Arc Furnace	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Iqbal Huda Sihotang, Sulistijono, Ika Ismail
35	Synthesis of Cashew Nut Shell Liquid (CNSL) by Hot Press Method and its Application as Anti Corrosion Coating	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Haniffudin Nurdiansyah
36	FABRICATION OF MESOPOROUS SILICA NANOPARTICLES BY SOL GEL METHOD FOLLOWED VARIOUS HYDROTHERMAL TEMPERATURE	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Hariyati Purwaningsih, Diah Susanti, Haniffudin Nurdiansah
37	The Effect of Weight Fraction Fe₂O₃:TiO₂ and Temperature Process of Pseudobrookite Synthesize (Fe₂TiO₅) on Optical and Electrical Properties	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Vania Mitha Pratiwi, Rindang Fajarin, Widyastuti
38	The Effect of BaM/PANI Composition with Epoxy Paint Matrix on Single Layer and Double Layer Coating with Spray Coating Method for Radar Absorbing Materials Applications	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Widyastuti, Rindang Fajarin, Vania Mitha Pratiwi
39	Sintering Temperature Effect on Electrical and Thermal Properties of Zn1-xAlxO as Thermoelectric Material Candidate	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Rindang Fajarin, Amelthya Rahel, Widyastuti
40	Study Design of Body And Temperature Zone Continuous Furnace Sintering Material Frangible Cu-5wt%Sn	The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017	Widyastuti

Judul Publikasi di Seminar Nasional dan Internasional tidak terindex Scopus

NO	JUDUL MAKALAH	SEMINAR	PENULIS
1	Analisis Impak dan Ricochet Peluru Frangible Cu-10wt%Sn dengan Metode Meshless Smoothed Particle Hydrodynamics	Seminar Nasional Metalurgi dan Material (SENAMM) X 2017	Mas Irfan PH, Widyastuti, Peniel Simaremare
2	ANALISA EFEKTIFITAS POLYETHYLENE DAN POLYPROPYLENE SEBAGAI TOP COAT PADA METODE PELAPIS 3 LAYER COATING TERHADAP KETAHANAN KOROSI DARI BAJA API 5L GRADE B	Seminar Nasional Metalurgi dan Material (SENAMM) X 2017	Agung Purniawan, Yosaphat SM Siahaan, Budi Agung Kurniawan
3	The effect of nitrogen dopant on the capacitive properties of graphene based supercapacitor	TACT 2017 International Thin Films Conference, Hualien, Taiwan	Diah Susanti, Dyah Ayu Safitri, Haniffudin Nurdiansah, Hariyati Purwaningsih, Yeny Widya R
4	PELAPISAN FeCrMnNiCSi PADA GREY CAST IRON FC 25 VARIABEL TEKANAN GAS PADA METODE THERMAL ARC SPRAY	Seminar Nasional Fisika ke II	Hariyati Purwaningsih, Diah Susanti, Haniffudin Nurdiansah
5	Pengaruh Penambahan SiO2 Hasil Ekstraksi Sekam Padi Pada Sintesis Natrium Superionik Konduktor (NASICON) dan Sifat Konduktivitas Ionik Baterai Elektrolit Padat	Seminar Nasional Fisika ke II	Hariyati Purwaningsih, Agung Purniawan, Rochman Rochiem

2016

Judul Publikasi Jurnal Internasional Terindex SCOPUS

NO	JUDUL MAKALAH	JURNAL	INDEX		PENULIS
1	Effect of carbon coating on the electrochemical performance of LiFePO4/C as cathode materials for aqueous electrolyte lithium-ion battery	Ionics 22, no. 3 (2016): 341-346.	SCOPUS		Lukman Noerochim, Ade Okta Yurwendra, and Diah Susanti
2	Building Glass OITC in Warm Temperature	Procedia Engineering 145 (2016): 630-637.		SCOPUS	Mediastika, Christina, Luciana Kristanto, Juliana Anggono, Fefen Suhedi, and Hariyati Purwaningsih.
3	Effect of Nano-BaTiO₃ on Thermal, Mechanical and Electrical Properties of HDDA/TPA Prepared by a Digital Light Processor RP Machine	Science and Engineering of Composite Materials.		SCOPUS	Sigit Tri Wicaksono, Shih-Hsuan Chiu, Kun-Ting Chen, and Sheng-Hong Pong
4	Mechanical Properties of Urethane Diacrylate/Bamboo Fiber Composite Fabricated by Rapid Prototyping System	Rapid Prototyping Journal 21, no. 3 (2015): 262-269.		SCOPUS	Chiu, Shih-Hsuan, Sigit Tri Wicaksono, Kun-Ting Chen, Chiu-Yen Chen, and Sheng-Hong Pong
5	Morphology of TiAlN Thin Film onto HSS as Cutting Tools by Using Mosaic-Styled Target RF Sputtering Method	The Journal of Pure and Applied Chemistry Research 5, no. 2 (2016).		BUKAN SCOPUS	Sigit Tri Wicaksono, Agung Purniawan, IGNB Dwistha Prayukti, and Tri Mardji Atmono
6	B-spline collocation method for boundary value problems in complex domains	International Journal of Computing Science and Mathematics 7.2 (2016): 110-125.		SCOPUS	Mas Irfan P Hidayat., Bambang Ariwahjoedi, and Setyamartana Parman
7	Casing strength degradation in thermal environment of steam injection wells	Journal of Physics: Conference Series, vol. 710, no. 1, p. 012017. IOP Publishing, 2016.		SCOPUS	Hidayat, M. I. P., S. Irawan, and Mohamad Zaki Abdullah

Judul Publikasi di Seminar Internasional (tidak terindex SCOPUS)

NO	JUDUL MAKALAH	SEMINAR	PENULIS
1	The Growth of AlN Nanomaterial via Vapor-Liquid-Solid (VLS) Method with Various Growth Temperature and Holding Time	The 6^th Basic Science International Conference, BaSIC 2016, Malang, March 2^nd – 3^rd 2016.	Diah Susanti, Mavindra Ramadhani, Hariyati Purwaningsih, Haniffudin Nurdiansah
2	“The Growth of AlN Nanomaterial via Vapor-Liquid-Solid (VLS) Method with Various Various Mass Aluminum Powder and Sputter Time”	The 6^th Basic Science International Conference, BaSIC 2016, Malang, March 2^nd – 3^rd 2016.	Diah Susanti, Ice Trianiza, Hariyati Purwaningsih, Haniffudin Nurdiansah
3	Effect of Post Annealing on Structure, Hardness and Fracture Toughness of Twin Wire Arc-Sprayed FeCrBMnSi Coatings	The 6^th Basic Science International Conference, BaSIC 2016, Malang, March 2^nd – 3^rd 2016.	Agung Purniawan, Hengki Irawan, Sigit Tri Wicaksono
4	Effect of Aluminum Content and Deposition Time on Hardness and Wear Resistance of Titanium Aluminum Nitride Thin Layer Deposited by Radio Frequency Sputtering	The 6^th Basic Science International Conference, BaSIC 2016, Malang, March 2^nd – 3^rd 2016.	Sigit Tri Wicaksono, Agung Purniawan, IGNB Dwistha Prayukti, Tri Mardji Atmono
5	Deposition of Thin Layer Titanium Aluminium Nitride on High Speed Steel Substrate by Radio Frequency Sputtering	The 2rd International Conference on Civil Engineering Research (ICCER 2016) and the 12^th National Seminar Graduate Program 2016, January 27-28, 2016, Surabaya	Sigit Tri Wicaksono, Agung Purniawan, IGNB Dwistha Prayukti, Tri Mardji Atmono
6	Microstructure and Adhesion Properties Post-Annealed metallic Coatingof FeCrBMnSi on Tube and Internal Structure Coal-Fired Boiler	The 2rd International Conference on Civil Engineering Research (ICCER 2016) and the 12^th National Seminar Graduate Program 2016, January 27-28, 2016, Surabaya	Agung Purniawan, Hengki Irawan, Sigit Tri Wicaksono
7	The Effects of Zn Mass and Electrolyte Type on the Capacitive Properties of Graphene-Based Supercapacitor	2016 International Symposium for Young Chemical Engineers, Chemical Engineering Department, National Taiwan University of Science and Technology (NTUST), Taipei-Taiwan, September 1-2, 2016	Diah Susanti (Invited Speaker), Januardana Hanung Pradita, Hariyati Purwaningsih, Haniffudin Nurdiansah, Lukman Noerochim, Yeny Widya Rakhmawati
8	The Effect of Hydrothermal Process Holding Time on The Capacitive Properties of Graphene-Based Supercapacitor	MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016	Diah Susanti, Achmad Azmy Adhytiawan, Hariyati Purwaningsih, Haniffudin Nurdiansah, Lukman Noerochim and Yeny Widya Rakhmawati
9	Synthesize and Electrochemical Performance of Fe₂O₃ Nano Ellipse as Anode for Lithium Ion Batteries	MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016	Lukman Noerochim, Eriek Aristya Pradana Putra, Sulistijono, Diah Susanti and Ahmad Subhan
10	Effect of Sintering Process on the Ferroelectric and magnetic Properties of Fe-doped PbTiO₃ Ceramics	MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016	Rindang Fajarin, Malik Anjelh Baqiya, Widyastuti, Vania Mitha Pratiwi and Rizka Andani
11	Laminate composite of TiO₂-graphene materials for use as Dye Sensitized Solar Cell (DSSC)	the 3^rd International Seminar on Fundamental and Application of Chemical Engineering (ISFACHE), Chemical Engineering Department, ITS, 1-2 November 2016	Diah Susanti, Yunizar Natanael Pragistio, Haniffudin Nurdiansah, Hariyati Purwaningsih, Rindang Fajarin, Ratna Ediati, Yeny Widya Rakhmawati

Judul Publikasi di Seminar Internasional terindex Scopus

NO	JUDUL MAKALAH	SEMINAR	PENULIS
1	The Effect of Hydrothermal Process Holding Time on The Capacitive Properties of Graphene-Based Supercapacitor	MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016	Diah Susanti, Achmad Azmy Adhytiawan, Hariyati Purwaningsih, Haniffudin Nurdiansah, Lukman Noerochim and Yeny Widya Rakhmawati
2	Synthesize and Electrochemical Performance of Fe₂O₃ Nano Ellipse as Anode for Lithium Ion Batteries	MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016	Lukman Noerochim, Eriek Aristya Pradana Putra, Sulistijono, Diah Susanti and Ahmad Subhan
3	Effect of Sintering Process on the Ferroelectric and magnetic Properties of Fe-doped PbTiO₃ Ceramics	MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016	Rindang Fajarin, Malik Anjelh Baqiya, Widyastuti, Vania Mitha Pratiwi and Rizka Andani